51±¾É«

Bachelor of Technology (Education) in Graphics and Construction Technology concurrent with Teacher Education

NFQ Level 8 major Award Honours Bachelor Degree
CAO points history
475 †
Course code
LM094
Duration
4 Years
† Students admitted to the programme are required to undergo a Garda Vetting process.
Fees
See what fees may apply to students
Subject area
Education
Course Director
Trevor Hickey
Email
Trevor.hickey@ul.ie
Tel
00 353 61 202894
Admissions:
Tel
+353 (0)61 233755
Queries
Contact the Academic Registry
Apply Now for September

If you are interested in teaching design-based activities within the technological subjects Materials Technology (Wood), Graphics, Design and Communication Graphics and Construction Studies, and enjoy working with people, then this course may be for you.

Key Fact: As a STEM (Science, Technology etc) programme, graduates are accredited by the Teaching Council of Ireland to teach Technology subjects at second level.

Why Study Graphics and Construction Technology concurrent with Teacher Education at UL?

UL's School of Education is the largest post-primary teacher education provider in the state and is ranked in the top 100 universities in the world for Education programmes. 51±¾É« is also ranked within the top 75 universities in Europe for excellence in teaching and learning.

This is a teacher education programme which aims to provide you with the opportunity to become a successful teacher of technology subjects at second level. These subjects include;

Junior Certificate

  • Wood Technology 
  • Graphics

Leaving Certificate

  • Construction Studies 
  • Design & Communication Graphics

Learn more about our courses and upcoming events

Explore
our campus

What you will study

The programme is four years in duration and includes a number of school based teaching practice placements. These include a six week placement in the spring semester of year two and a further ten week placement in autumn semester of year four. These placements are designed to provide you, the student teacher, with a genuine opportunity for professional development under the supervision of faculty members of the University.

There are four streams of learning in the programme. These streams address the key knowledge areas for initial teacher education in this field. These streams are;

  • Education
  • Wood Technology
  • Design & Communication Graphics
  • Architectural Technology
  • Subject Pedagogy

Throughout the programme, your knowledge, skills, values and attitudes in each of these areas are continually developed while placing a strong emphasis on your development as a critical, reflective and skilled teacher. The module content has been carefully selected to be relevant to the requirements of the Leaving Certificate and Junior Certificate syllabuses in the Technology subjects.

In Year three and four you will continue to study Education as well as Architectural Technology, and Design and Communication Graphics. You will also complete a research-driven module, which gives you an opportunity to reflect on your School Placement experiences and propose how to develop an aspect of your discipline or you as a professional.

 

Semester 1

 

Semester 2

PN4011

Design and Communication Graphics 1

PN4012

Design and Communication Graphics 2

PN4021

Process Technology 1

PN4042

Wood Technology & Design 1: Processing Principles and Skills

MA4701

Technological Mathematics 1

PN4032

Wood Technology & Design 2: Wood Science and Forest Resources

ET4003

Electro Technology (Ed)

EN4042

Professional Digital Competence for Teaching

EN4051

Contemporary Understandings on Education: Philosophical Perspectives

EN4052

Understanding Young People and how they Learn: Psychological Perspectives

 

Semester 3

 

Semester 4

PN4023

Design and Communication Graphics 3

En4054

Understanding Classroom and School Practices

EY4003

Subject Pedagogics 1 (Wood Technology and Graphics)

TP4024

School Placement

PN4053

Wood Technology and Design 3: Material processing Practice and Safety

 

 

PN4043 

Classroom Practice in Technology Education (Wood Technology and Graphics)

 

 

EN4033

Planning for Learning

 

 

 

Semester 5

 

Semester 6

PN4025

Design and Communication Graphics 4

PN4036

Design and Communication Graphics 5

PN4065

Construction Technology 1

PN4046

Subject Pedagogics 2 (Construction Studies and Graphics)

WT4055

Wood Technology and Design 4: Advanced Processing Technologies

PN4066

Construction Technology 2

EN4035

Curriculum and Assessment: Policy and Practice

PN4076

Construction Technology 3

EN4045

Diversity and Social Justice in Education: Sociological Perspectives

EN4046

Diversity of Learners: Inclusion and Special Educational Needs

 

Optional 

 

  

GA4006

An Ghaeilge Ghairmiuil

 

 

 

Semester 7

 

Semester 8

TP4017

School Placement

PN4038

Design and Communication Graphics 6

 

 

PN4068

Technology Teacher as Researcher

 

 

WT4028

Construction Technology 4: Project and Skills

 

 

WT4048

Health and Safety in Technology Education

 

 

EN4008

Teacher as Professional

 

Entry requirements

CAO points history
475 †
Minimum grades

Applicants are required to hold at the time of enrolment the established Leaving Certificate (or an approved equivalent) with a minimum of six subjects which must include: Two H5 (Higher level) grades and Four O6 (Ordinary level) grades or four H7 (Higher Level) grades. Subjects must include Mathematics, Irish or another language, and English.
Subject requirements

In addition, applicants must hold an O3/ H7 grade in Mathematics and an O4/ H7 grade in at least one of the following: Applied Mathematics, Physics, Chemistry, Physics with Chemistry, Engineering, Design and Communication Graphics, Technology, Construction Studies, Agricultural Science, Biology.

Garda vetting is required.
Additional considerations

We welcome applications from mature students. Mature applicants must apply through the Central Applications Office (CAO) by 1 February.

Application information for mature student applicants

QQI Pathways information available here.

Note: the University’s Special Mathematics Examination is applicable to this programme. More information available

Internal Transfers

Transfers from LM095 to LM094

1. Transfer at the very beginning of the course: To transfer at the very beginning of the course you must meet the CAO points requirement for that year.  

2 . Transfer at the end of semester 1/ beginning of semester 2: As semester 1 is common to both LM094 & LM095 it is possible to transfer from LM095 to LM094 and continue to semester 2. 

Internal transfers are subject to the relevant policy. for up-to-date information. 

In summary, the policy requirements for internal transfer include:

• you must have completed at least one full semester at UL, including exams,

• there must be places available on the course,

• you must meet the CAO points requirement on the year they entered UL, including any HEAR / DARE points reduction,
alternatively, be no lower than 20 points below the minimum CAO cut-off points and have a QCA of at least 2.60 with no deficient grades.

3. Transfer at the end of first year: 

If you finish first year in LM095 and then decide to transfer

In semester 2, LM094 and LM095 have TWO different modules. If you transfer from LM095 to LM094 at the end of first year, you will have to go back to the start of semester 2 and do the modules from LM094 that you missed on a ‘Link in’ basis (i.e. essentially repeat year 1 but just to do those modules in semester 2 that are unique to LM094). There is no way around this; it will take a year.

Also, you will have to pay full fees for these two modules.

The same principle applies if you transfer at any later stage; go back to semester 2 of first year and start there; linking in and paying for all the modules that you need to make up.

The above policy link has more detailed information and a link to the internal transfer application form.
Non-EU Entry Requirements

How to apply

Where are you applying from? How to Apply
Ireland Irish students must apply to UL via the CAO. More information can be found here. 
The UK  Students who have completed their A-Levels can apply to UL via the CAO. More information can be found on the Academic Registry website. 
The EU EU Students can apply to UL via the CAO. More information can be found on the Academic Registry website.

 

Fees and funding

Student course fees are broken into three components - Student contribution, Student Levy and Tuition Fees.

A number of illustrative examples of fees for this course based on the current fee levels have been set out in the tables below.

An explanation of the components, how to determine status and the criteria involved is provided below the examples as is a list of possible scholarships and funding available.

EU Students with Free fees status in receipt of a SUSI grant

HEA pays Tuition Fees €4,262
SUSI pays Student contribution €3,000
Student pays Student Levy €100
€7,362

EU Students with Free fees status not in receipt of a grant

HEA pays Tuition Fees €4,262
Student pays Student contribution €3,000
Student pays Student Levy €100
€7,362

Students with EU fee status not in receipt of a grant

Student pays Tuition Fees €4,262
Student pays Student contribution €3,000
Student pays Student Levy €100
€7,362

Non-EU Students

Student pays Tuition Fees €20,900
Student pays Student Levy €100
€21,000

Student course fees are comprised of the following components:

Student Contribution

Annual charge set by the government for all full-time third level students. All students are liable unless they have been approved for a grant by (SUSI). Please refer to https://www.studentfinance.ie to determine your eligibility for a grant and for instructions on how to apply. The current student contribution is set at €3000.

Student Levy

All students are liable to pay the Student Levy of €100. Please note the Student Levy is not covered by the SUSI Grant.

Tuition Fees

These are based on Residency, Citizenship, Course requirements.

Review the three groups of criteria to determine your fee status as follows

  1. Residency
    • You must have been living in an EU/EEA member state or Switzerland for at least 3 of the 5 years before starting your course
  2. Citizenship
    • You must be a citizen of an EU/EEA member state or Switzerland or have official refugee status
  3. Course Requirements (all must be met)
    • You must be a first time full-time undergraduate (Exceptions are provided for students who hold a Level 6 or Level 7 qualification and are progressing to a Level 8 course in the same general area of study).
    • You must be undertaking a full-time undergraduate course of at least 2 year’s duration
    • You cannot be undertaking a repeat year of study at the same level unless evidence of exceptional circumstances eg serious illness is provided (in which case this condition may be waived)

Depending on how you meet these criteria your status will be one of the following -

  • Free Fee Status: You satisfy all three categories (1, 2 and 3) and therefore are eligible for the .
  • EU Fee Status: You satisfy both the citizenship and residency criteria but fail to satisfy the course requirements and are liable to EU fees.
  • Non EU Fee Status: You do not meet either the citizenship or residency criteria and are therefore liable to Non EU fees.

More information about fees can be found on the Finance website

These scholarships are available for this course

Title Award Scholarships Available
Johnson and Johnson WiSTEM2D Programme

These scholarships are available for all courses

Your future career

Employability skills from this degree

  • Design skills to complement technical know-how
  • Strong communication and leadership skills
  • An analytical mind with strong problem-solving ability
  • Strong leadership and organisation skills
  • The ability to work on your own initiative and as part of a team
  • High levels of creativity, imagination and vision
  • The ability to work well under time and budget pressures
  • Must enjoy working with your hands and be willing to work outdoors

Further Study Options

Job titles for graduates with this degree

Graduates progressing directly into employment take up a wide variety of roles. The following provides a sample of initial roles listed on the Graduate Outcomes Survey by graduates approximately one year after graduation:

  • Secondary School Teacher
  • Construction Studies Teacher
  • Design and Communication Graphics Teacher
  • Wood Technology Teacher
  • Graphics Teacher
  • Design and Technology Teacher
  • Head of Graphics Department/Teacher
  • Design Consultant
  • Researcher
  • Fire Safety Engineer
  • Quality Assurance Technician
  • Customer Service Advisor

Student Profiles

Sean O’ Riordan

During secondary school, my two favourite subjects by far were woodwork and technical graphics. This continued after my Leaving Cert where I worked as a carpenter for 3 years - this experience gave me valuable practical skills which have helped me to date in this course. What I noticed after school is how much I enjoyed working with people so the idea of being able to work with students by teaching my favourite subjects is what helped me in deciding to return to college.

Throughout the course, the emphasis is always brought back to teaching which is so very relevant to the course. There is a good mix of practical and theory and the coursework really helps to develop you as a student teacher. Teaching placement gives you the opportunity to grow in confidence and develop your teaching skills in the classroom. UL has an excellent atmosphere with brilliant support available for students from the course lecturers and tutors. I would recommend anyone considering this course to visit the campus and maybe get in touch with current students or graduates of the programme. If you have a flair for practical/design-based subjects and want to teach, then Technology Education at UL might be the course for you.

 

Fiona Lafferty

When I came to UL for the open day, I loved the fact that all the facilities were on the one campus. This course provided me with the most direct route to becoming a second level teacher of Technology subjects. At second level, I discovered I had a flair for craft, design, working with my hands and interacting with young adults.

Most of the course is practical, with lots of marks allocated to projects. There is an excellent mix of subjects. I love the practical elements of the course where we are encouraged to express ourselves creatively. The lecturers are very approachable and helpful.

I spent sixteen weeks on teaching practice placement, which was great in developing my teaching skills. This experience will benefit me greatly as I embark on a career as a second level teacher of technology subjects.

 

Patrick Kelly

I developed a great interest in technology subjects from an early stage in school. I really loved Materials Technology Wood and drawing, but I also enjoyed working with other students and teachers, so I felt that this course would be a good option for me. The course itself is fast-paced and challenging, but very enjoyable and rewarding. There is a great mix of practical and project work throughout the four years. The lecturers are very helpful and supportive and are always ready to lend a hand.

Design and creativity are strongly encouraged throughout the course, along with an emphasis on teaching and learning. All aspects of the course are linked to education; during the teaching placement, one gets a great chance to experience school life and teaching in front of a class. I feel that I have been given a great chance to develop as a professional and as a person before starting out in my teaching career.

" "

Bachelor of Technology (Education) in Graphics, Engineering and Technology concurrent with Teacher Education

Read More